Direct Networking cylinder / Smarthandles / SmartRelay

The WaveNet Network Knob Cover incorporates the Lock Node into the metal cover on the electronics side of a locking cylinder. It thus enables direct networking without the need to fit additional Lock Nodes next to the door and you can also dispense with I/Os. The network knob cover can be retrofitted very easily by replacing the cover on the electronics side of a locking cylinder. New cylinders for direct networking can be ordered as the Network Inside version .WNM.

+ - Technical Details Click to collapse

Retrofit network knob cover for networking TN4 locking cylinders The network knob covers can be used with all versions of the Digital Locking Cylinder 3061 (Q2/2008 and higher)
Standard stainless steel version
Brass version (.MS)
Dimensions: approx. 25 x 30 mm (Lx Ø)
Power supply: from TN4 locking cylinder
Battery life:
up to 150,000 lock operations or up to 5 years on standby
Power consumption: without data traffic approx. 6 µA;
with data traffic approx. 30 mA
Max. transmission power: approx. 1.8 mW at approx. 2.5 dBm
Receiver sensitivity: -90 dBm
Range to central/routing node: up to 30 m,
depending on the building structure
Temperature range:
operational: -15 °C to +50 °C
in storage: -35 °C to +50 °C

+ - Product Variations Click to collapse

FOR DIGITAL LOCKING CYLINDER 3061 – ACTIVE AND HYBRID FOR PADLOCKS – ACTIVE
Network knob cover for automatic configuration as retrofit knob cover for direct networking, stainless steel		WNM.LN.I
Brass design		.MS
Network knob cover for automatic configuration as retrofit knob cover for direct networking, in a KNAUF7 design		WNM.LN.I.KNAUF7
Network knob cover for automatic configuration as retrofit knob cover for direct networking, in a KNAUF12 design		WNM.LN.I.KNAUF12
FOR DIGITAL LOCKING CYLINDER 3061 – PASSIVE (.MP) (G2 ONLY)
Retrofit knob cover for auto-configuration with integrated antenna and separate network circuit board for direct networking, stainless steel design		WNM.LN.I.MP
FOR SMART HANDLES 3062
Lock Node for integration into digital door fittings to directly network Smart Handle 3062 (can be retrofitted)		WNM.LN.I.SH
Weatherproof version for outdoor		.WP
FOR SMART RELAY 3063
Lock Node to be integrated into the Smart Relay housing to directly network Smart Relay 3063 with auto-configuration (can be retrofitted)		WNM.LN.I.SREL.G2
FOR SMART RELAY 2 3063
Lock Node to be integrated into the Smart Relay 2 housing to directly network Smart Relay 2 with auto-configuration		WNM.LN.I.SREL2.G2
FOR PADLOCKS – PASSIVE
Retrofit knob cover for auto-configuration with integrated antenna and separate network circuit board for direct networking, stainless steel design		WNM.LN.I.MP